RE-900 Series

Overview

The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking – TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-900 Series fire alarm control panel is designed with unique protocol to be used for small, medium & Large establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Special Features
Tech Specifications
Downloads
Certificates
Tools

Complies with UL -864 and NFPA-72.
20 x 4 Dot Matrix LCD Display.
Operates on 120 – 220v 60 /50 Hz, AC Mains power supply.
Standby (battery) backup 24v DC power supply with builtin charger.
Touch Keypad for user friendly operation.
Epoxy powder coated finish.
Class- B, Style B / C initiating device circuit (IDC).
All zones accept smoke detectors and any normally open contact device.
Class B Notification Appliance Circuits (NAC).
NAC shall be programmed as auto silence / Silence Inhibit.
Error free Fire / Fault status in unambiguous colored LED indication.
1000 Event storage with RTC.
Main, Standby status with audible and visual indication.
Two Form C relays for fire and fault.
Resettable / Steady 24V D.C. Output.
RS 485 Communication facility.
TCP/IP facility (Optional)
MODBUS for BMS integration (Optional).
PC software (optional)
External Zone Wise Sounder/Contact via RS 485 (Optional).
All field wiring circuits are supervised.
Zone Isolation facility with loop voltage cut off.
Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128.
Facility to connect Public Address System (PA) through RS-485 Communication.
Peer to Peer network facility.
Maximum 16 panels can be connect in a Single Network.

Electrical Specification

Primary Power 120 – 220VAC ± 10%, 60 / 50 Hz.	Initiating Device Circuits All zones are Class B Style B/C operation (Programmable). Normal Operating Voltage : 14 – 21 VDC. Alarm Current : 15 – 30mA. Short Circuit Current : 45mA Maximum. Loop resistance : 100 ohms Maximum. End-Of-Line Resistor : 4K7, 1/2watt Standby Current : 7mA (2.5mA for Detectors)
Standby Power 24V D.C Quiescent current : 120 mA
Operating Condition Operating Temperature : 0 – 49° C/32-120° F. Relative Humidity : 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.
Charging Circuit Charging Voltage : 28.0V, ±0.5V Charging Current : 1.2A(Max); D.C. Output(Resettable / Steady) 24VDC Output ,1A Max.
Common Relays Type : Form C No of Relays : 2 Relay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @ 125VAC. Power Factor : 1.0	Notification Appliance Circuits Class B Style – Y wiring Operating Nominal Voltage : 24VDC Special Application Current : from 12 Zone Upto 64Zone NACs : 2 Amps (1 A per circuit) Current above 64Zone NACs : 4 Amps (1 A per circuit) Line Drop : 1.8V End-Of-Line Resistor : 4K7, 1/2watt

Dimensions

Zones	Width	Height	Depth
12 Zone	425	350	120
16 Zone	425	350	120
20 Zone	500	600	160
24 Zone	500	600	160
32 Zone	500	600	160
48 Zone	600	700	160
64 Zone	600	1000	160
96 Zone	600	1400	160
128 Zone	600	1400	160

Ordering Information

Models	Description
RE-9012	12 Zone Fire Alarm Control Panel
RE-9016	16 Zone Fire Alarm Control Panel
RE-9020	20 Zone Fire Alarm Control Panel
RE-9024	24 Zone Fire Alarm Control Panel
RE-9032	32 Zone Fire Alarm Control Panel
RE-9048	48 Zone Fire Alarm Control Panel
RE-9064	64 Zone Fire Alarm Control Panel
RE-9096	96 Zone Fire Alarm Control Panel
RE-9128	128 Zone Fire Alarm Control Panel

Compatible Devices

Model	Description
RE-900RP Series	Fire Alarm Repeater Panel

Datasheet

CE Certificate
IP Certificate

Battery Calculator